Blog

Heat-transfer films use carrier sheets or release liners to hold the artwork in position until transfer. Peeling at the wrong temperature, angle or stage can lift or tear parts of a logo even when the fabric and graphic are otherwise compatible.

Disperse dyes in dark polyester can migrate into some polymeric heat-transfer films and contaminate a white logo, producing a pink or dull cast. Special barrier layers may reduce migration, but their effectiveness depends on the dye, adhesive, pressing process and ageing conditions.

Silicone grippers are used on cycling jerseys, compression shorts and activewear hems to reduce movement against skin or an inner layer. A strip can provide excellent initial grip yet become uncomfortable, peel or slip after sweat and washing.

Silicone-based textile softeners can improve the hand feel of polyester, but some finishing treatments alter surface wetting and may make selected prints, adhesives or heat transfers harder to bond. The effect depends on formulation and treatment level.

Bonded hems use heat-activated tape or film rather than, or alongside, conventional stitching. They can create a clean low-profile edge, but an initial smooth appearance does not prove the bond will survive washing, repeated extension and skin contact.

Prevent reflective print cracking on stretch polyester sportswear. Learn about transfer compatibility, pressing and wash tests.

Why does sublimation printing become visible on the back of polyester fabric? Learn how fabric thickness, porosity, ink load, heat and dwell time control dye penetration and reverse-side show-through.

Why do sharp polyester prints become blurry, stained or haloed after heat pressing? Learn how disperse dye migration, thermomigration, temperature and print chemistry affect edge definition.

Why does polyester fabric become shiny after sublimation or heat transfer? Learn how heat, platen pressure and dwell time flatten knitted loops, change surface reflection and create visible gloss marks around pressed areas.