Blog

A heat press can display the correct temperature while some zones of the platen deliver less heat to the transfer. Uneven actual surface temperature, pressure or contact time may create pale, patchy or inconsistent polyester sublimation colours.

A polyurethane-coated polyester fabric may look uniformly sealed but contain microscopic pinholes, thin spots or damage that allow water through. Visual appearance alone cannot prove waterproof performance; screening and a suitable barrier test serve different purposes.

Cutting woven polyester at approximately 45 degrees to the warp and weft changes how the fabric shears and drapes. A bias-cut panel often falls more fluidly, but the same mobility may create length growth, twisted seams or sizing variation if it is handled without relaxation controls.

Two panels cut from the same dyed polyester fleece roll can look lighter or darker simply because the raised pile points in opposite directions. This is an optical effect of surface orientation, not necessarily a colour-dyeing mistake.

Select zipper pullers for polyester sports jackets. Learn about grip, pull-tab strength, attachment methods and outdoor durability.

Thermal conductivity helps explain why two polyester fabrics with similar GSM can feel different in warmth or coolness because structure, thickness and air content change heat flow.

Seam elongation measures how much a sewn seam can extend before restriction or failure, especially important in stretch polyester garments.

Bursting strength measures how much multidirectional pressure a polyester knit can withstand before rupture, making it important for T-shirts and sportswear.

Sportswear comfort depends partly on how liquid sweat moves away from the skin-facing surface and spreads toward the outer side of the textile. One-way liquid transport describes a directional difference in moisture movement through the fabric. It is useful for evaluating ce